HPF

Project Description产品描述

High pass filter HPF
HPF高通滤波器

HPF filters are specially designed to remove harmonics from the current absorbed by 6 pulse power converters, such as frequency converters for motors, UPS, welding equipment, etc. They are essentially passive filters based on a series-parallel combination of inductance and capacitors. (Main function is to filter the 5th and 7th current harmonic and to decrease the level of the 11th and 13th current harmonics). With these HPF filters we will be able to get a reduction of the THD (I) level higher than a simple input reactor reduction, decreasing THD (I) to values below 8%. At full load conditions the THD (I) becomes lower than 5%.
HPF滤波器是专门设计用来消除由6个脉冲功率转换器(如电机变频器、UPS、焊接设备等)吸收的电流中的谐波。它们基本上是基于电感和电容器的串并联组合的无源滤波器(主要功能是对五次和七次电流谐波进行滤波,并降低十一次和十三次电流谐波的水平。使用这些HPF滤波器,我们将能够获得比简单的输入电抗器降低更高的总谐波分布(I)水平的降低,将总谐波分布(I)降低到低于8%的值,在满负荷条件下,总谐波分布(I)变得低于5%。

Accessories 附件:

  • Overcorrection regulating Kit
    过矫(过校正)调整工具包
  • Measuring kit
    测量工具包
Rated voltage
电压范围
400 ~ 480 V
Frequency
频率
50/60 Hz
RMS load current (Ic)
额定负载电流
4 … 1000 A
Max. overload
最大过载
1 min. a 1,5 Ic
Filtered RMS current (If)
滤波额定电流
1.6 … 72 A
THD residual current
总谐波分布剩余电流
Aprox. 8%
Voltage drop at In
电压降
< 2%
Construction
结构
Metal cabinet
金属柜体
Protection degree
防护等级
IP20
Colour
颜色
Grey RAL 7035
Installation
安装
Indoor
Assembly
装配
A/B type: Wall mounting, C/D type: Floor mounting
A/B型:墙壁安装,C/D型:地面安装
Standards
标准
EN 60439, EN 60831, UNE-EN 61000-6-3,UNE-EN 61000-6-4

Other powers, voltages and frequencies on request.
其他功率,电压和频率可按要求定做。

FileDateSize
Datasheet
产品资料
06/06/20180.19 MB
Manual
说明书
30/05/20180.3 MB